39
MAINTEN ANCE
Battery r emoval & installation
The battery is in the battery box below seat.
NOTE: Always keep ignition switch OFF when servicing
the battery.
3
3
3
3
3
4
4
4
4
4
Fuses
When frequent fuse failures occur , it usually indicates a short
circuit or an overload in the electrical system.
Fuse r eplacement
FUSE SIZE:
7A
(One MAIN fuse & one SPARE)
NOTE: See your KYMCO dealer for electrical system
diagnosis and repair.
Never use a fuse with a different rating from that speci-
fied. Serious damage to the electrical system or a fire
hazard may result, causing a dangerous loss of lights
or engine power.
1. When removing the battery for charging or replacement, dis-
connect the negative (-) terminal lead
3
from the battery
first, then disconnect the positive (+) terminal lead
4
.
2. When installing the battery , connect the positive terminal
lead (+) first, then the negative terminal lead (-).
1. Open the fuse holder
5
.
Pull the fuse holder clips
6
out of the holder.
2. Slide the fuse
7
out of
the holder clips.
3. Install a new fuse
8
of
the proper specification
into the holder clips.
4. Press the fuse and the
holder clips
6
back into
the holder.
5. Close the fuse holder
5
and set it back in place.
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
8
8
8
8
8
7
7
7
7
7
6
6
6
6
6