KYMCO Mongoose 90 R Page 136 Owner'S Manual Download

Page: 136 / 160

7. Clean the seat with a vinyl upholstery

cleaner to keep the cover pliable and
glossy.

8. Automotive type wax may be applied to all

painted and chrome plated surfaces. Avoid
combination cleaner-waxes. Many contain
abrasives which may mar the paint or
protective finish.

When finished, start the engine and let it

POTENTIAL HAZARD

Operation with wet brakes after washing.

WHAT CAN HAPPEN

Wet brakes may have reduced stopping
ability, increasing the chance of an
accident.

HOW TO AVOID THE HAZARD

Test the brakes after washing. Apply the
brakes several times at slow speeds to let
friction dry out the linings.

127

WARNING

Summary of Contents for Mongoose 90 R

































































































































































Search results

Summary of Contents for Mongoose 90 R

Reviews:

Related manuals for Mongoose 90 R

Brands by name

Popular brands

KYMCO Mongoose 90 R, Owner'S Manual

Search results

Summary of Contents for Mongoose 90 R

Reviews:

Related manuals for Mongoose 90 R

Brands by name

Popular brands