KYMCO Mongoose 90 R, Owner'S Manual

Page: 125 / 160

Drive chain cleaning and lubrication
The drive chain is equipped with rubber O-rings
between the chain plates. Steam cleaning, high-
pressure washes, and certain solvents can
damage these O-rings. Use only kerosene to
clean the drive chain. Wipe it dry, and
thoroughly lubricate it with SAE 30~50 motor oil.
Do not use any other lubricants on the drive
chain. They may contain solvents that could
damage the O-rings.
1. O-rings
Cable inspection and lubrication
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the outer
covering of control cables becomes
damaged.
Cables can also become frayed or kinked.
Operation of controls could be restricted,
which could cause an accident or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace
damaged cables.
Lubricate the inner cables and the cable ends. If
the cables do not operate smoothly, ask a
KYMCO dealer to replace them.
Recommended lubricant:
KYMCO chain and cable lube or
SAE 10W40 motor oil
WARNING
116