31
(4) BATTERY
X
This model adopts the battery which needs no refilling
of distilled water.
X
When cleaning the terminal terminals, remove the
screws attaching the battery cover on the floor board and
then open the battery cover.
X
When battery terminals are corroded, take out the
battery for cleaning.
X
After cleaning, apply a thin coat of grease or Vaseline to
battery terminals and then install the battery.
※
CAUTION:
X
Never open the closed-type battery electrolyte cap.
X
If the motorcycle will not be used for a long time, the
battery will discharge electricity by itself. Remove the
battery and put it in a cool place after it is fully charged
to prevent electricity leakage.
X
If the motorcycle will not be used for a long time,
remove the negative (-) terminal.
X
Do not smoke or allow flames or sparks near the battery
while removing and installing it.
X
Turn off the ignition switch before removal or
installation. The negative (-) terminal shall be removed
first and the positive (+) terminal shall be installed first
X
Tighten the loose terminal nuts securely.