KYMCO 2 STROKE, Owner'S Manual, Page: 38 / 71

USING THE ELECTRIC STARTER BUTTON
•
Push the electric starter button without rotating the throttle
grip.
for
onds
When starting the engine remember to that the rear
brake lever must be applied to connect power. The
•
If the engine fails to start after the electric starter button is
Pressed for 3 – 4 seconds when it is warm, rotate the throttle
or 1/8 – 1/4 turn to facilitate starting. grip f
•
It may be difficult to start the scooter if it has not been used
a long period of time or if the fuel tank is empty. If the engine
led with gasoline, is still hard to start after the fuel tank is refil
slightly turn the throttle grip and push the electric starter button
simultaneously several times to start the engine.
•
In order to avoid battery overcharge, do not push the starter
button for more than 5 seconds.
er button has
•
If the engine does not start after the electric start
been pushed for more than 5 seconds, wait an addition 5 sec
before pushing the button again.
•
Pushing the electric starter button while the engine is
y damage the engine. running could seriousl
•
brake light will come on when power has been
connected.
- 32 -