KYLAND KIEN1008BA Series, Hardware Installation Manual, Page: 15 / 28

Mounting
9
Figure 9 Panel Mounting
ƽ
Panel Mounting
3.2.2 Panel Mounting
Screw
Screw
2
1
6.5
4
Note:
Purchase the plate (optional) for panel mounting.
Step 1: Use screws to secure the plate for panel mounting to the rear
panel of the device.
Step 2: Select the mounting position (on a wall or inner wall of a
cabinet) for the device and guarantee adequate space and
heat dissipation (dimensions: 53.6mm×135mm×106.5mm).
Step 3: Punch four holes in the selected position according to the
dimensions for panel mounting. Insert four screws into the four
holes respectively, and turn the screws with a screwdriver until about
a 5mm distance is left between each screw head and the wall.
Step 4: Align the four mounting holes on the plate for panel mounting with
the four screws. Make the screws pass through the
Ф 6.5 positions
in the following figure. Move the device in direction 1 until the
four screws are in the
Ф 4 positions. Then tighten the screws.