KYLAND KIEN1008BA Series, Hardware Installation Manual, Page: 13 / 28

Mounting
7
3.2 Mounting Modes and Steps
The integrated device models support DIN-rail and panel mounting while
bare board models can be embedded in other devices for integration. Before
installation, make sure that the following requirements are met.
1) Environment:temperature (-40
ć
to 85
ć
), ambient relative humidity
(5% to 95%, non-condensing)
2) Power requirement:The power input is within the voltage range of
the switch.
3) Grounding resistance:<5
Ω
4) No direct sunlight, distant from heat source and areas with strong
electromagnetic interference.
Figure 7 DIN-Rail Mounting
ƽ
Mounting
3.2.1 DIN-Rail Mounting
1
2
DIN rail connecting
seat
DIN rail
Step 1: Select the mounting position for the device and guarantee
adequate space and heat dissipation (dimensions:
53.6mm×135mm×106.5mm).
Step 2: Insert the connecting seat onto the top of the DIN rail, and
push the bottom of the device inward and upward to ensure
the DIN rail fits in the connecting seat. Make sure the device
is firmly installed on the DIN rail, as shown in the following figure.