KYLAND KGW3204, User Manual, Page: 38 / 44

34
Then, click
“Serial Settings” in navigation bar to set the parameters of each serial port, click “Save” to save the
change.
Then, click
“Agent Settings” in navigation bar and select “Gateway Settings” to set the parameters of the
device, and click
“Save” to save the change.
Enter into the
“Device List” in navigation bar and click “Add New Slave” to add a new slave device.
B.
PC Configuration
Run
“Modbus Slave” software on PC. The “Modbus Slave” parameters must be configured as shown in the
following figure.
Connection: Serial Port
Mode: RTU