KYLAND KGW3204, User Manual, Page: 26 / 44

22
remote port number and IP address must be unique, and the local port number should be unique as shown in
the following picture.
4.5 Serial Settings
The Serial Setting page is where serial
port’s communication parameters are configured. You can modify the
Alias Name, Baud Rate, Data Bit, Parity, Stop Bit, Flow Control, and Hardware Interface. Click
“Save” to save
the current changes to the device.
Serial Parameters
：
•
Alias: the modifiable name of the serial ports
•
Baud Rate: support 300bps
～
460800bps
•
Date Bits: 7,8 (ASCII: 7; RTU: 8)
•
Stop Bits: 1, 2
•
Parity: Odd, Even, Mark, Space and None
•
Flow Control: XON/XOFF, RTS/CTS and None
•
Hardware Interface: support RS-232, RS-485 and RS-422
4.6 Agent settings (Agent Mode)
Only in Agent mode some agent settings should be carried out for the serial port in KGW3204, such as
gateway settings, slave list, and data query. Click
“Save” to save the current changes to the device. There is
no set operating in transparent mode.