Mounting
6
3.2.2 Panel Mounting
Caution:
Purchase the plate (optional) for panel mounting.
Panel Mounting
Step 1: Use screws to secure the plate for panel mounting to the rear panel of the device.
Step 2: Select the mounting position (on a wall or inner wall of a cabinet) for the device and
guarantee adequate space and heat dissipation (dimensions: 88mm×135mm×137mm).
Step 3: Punch four holes in the selected position according to the dimensions for panel mounting.
Insert four screws into the four holes respectively, and turn the screws with a screwdriver
until about a 5mm distance is left between each screw head and the wall.
Step 4: Align the four mounting holes on the plate for panel mounting with the four screws. Insert
the screws through the Ф6.5 positions in the following figure. Move the device in direction 1
until the screws are in the Ф4 positions. Then tighten the screws.
Figure 7 Panel Mounting
