Mounting
5
4) No direct sunlight, distant from heat source and areas with strong electromagnetic interference.
3.2.1 DIN-Rail Mounting
Mounting
Step 1: Select the mounting position for the device and guarantee adequate space and heat
dissipation (dimensions: 88mm×135mm×137mm).
Step 2: Insert the connecting seat onto the top of the DIN rail, and push the bottom of the device
inward and upward to ensure the DIN rail fits in the connecting seat. Make sure the device
is firmly installed on the DIN rail, as shown in the following figure.
Figure 5 DIN-Rail Mounting
Dismounting
Step 1: Insert the head of a screwdriver into the opening of the spring locking piece at the bottom
from the left. Lift the handle of the screwdriver to open the spring locking piece of the
connecting seat, as shown on the left of the following figure.
Step 2: Move the device in direction 2 until the bottom of the device is detached from the DIN rail.
Then move the device in direction 3 and uplift the device until the top of the connecting seat
is detached from the DIN rail.
Figure 6 DIN-Rail Dismounting
