Mounting
5
3) Grounding resistance: <5
.
4) No direct sunlight, distant from heat source and areas with strong electromagnetic
interference.
5) The installation environment meets the ATEX / IECEx Certified IP40 requirements. No
direct touch, to avoid personal damage.
3.2.1 DIN-Rail Mounting (Fixed in inside of Enclosure or Equipment only)
Step 1: Select the mounting position for the device and guarantee adequate space and heat
dissipation (dimensions: 30mm×115mm×68mm).
Step 2: Insert the connecting seat onto the top of the DIN rail, and push the bottom of the
device inward and upward to ensure the DIN rail fits in the connecting seat. Make
sure the device is firmly installed on the DIN rail, as shown in the following figure.
Figure 4 DIN-Rail Mounting
3.2.2 DIN-Rail Dismounting
Step 1: As shown in the following figure, press the device downward and move the device in
direction 1 until the bottom of the device is detached from the DIN rail.
Step 2: Pull the device upward and move the device in direction 2 until the device is removed
from the DIN rail completely.
