KYK Hyd-Hisha, User Manual

Page: 15 / 25

13
How to check the water pressure and set up
If the water pressure is too low or high, the buzzer will be sounded, when you drain the water.
The machine will sound the warning, if the water pressure is lower than 0.5liter, higher than
3.5liter. When you install the machine for the first time, turn on the machine with closed water
pressure controlling valve, and then slowly open the valve to adjust the water pressure.
(The proper water pressure is 1.5~3.0kgf/cm and water pressure is 0.8L/min)
The case that ground water or solid quality of water is used
■
If the quality of groundwater is bad, use outer filters.
■
For areas with high limestone in the water, use special filter to remove limestone.
For hard water, choose appropriate outer filters. Clean the machine by pressing CLEAN
button regularly.
Diverter installation may cause pipe particles or rusts. Run
the water out to your tap to protect the machine.