KYK Hyd-Hisha, User Manual

Page: 12 / 25

1
0
All hookup part of pipe arrangement has to be covered by teflon tape for avoiding the
leakage and you control the bounding number of tape for keeping the level of a horizontality
and a perpendicularity.
When you decompose and reassemble the product, if you give the over force, it will be
possible to leak after assembling the product because of a pipe arrangement distortion of raw
water, a break out of rubber packing and a breakage.
If you stop down the nut too strong, the water will be possible to leak because the hose in
the hose stop down nut can be torn. Or if you stop down the nut too loose, the water will leak
because the hose is missed from the switch valve.
So you connect the hose safely by giving the proper strength carefully.
If you misconnect hoses between inlet and ozone port, it may not generate
hydrogen and cause the main failure. Any failure from this misconnection should be
covered by the person who did the installation.
Switch valve of incoming water