12
Installation
Firmly connect the hose for
acidic water output
5
Open the tap water and plug the
device into a wall outlet. You will hear
a start-up sound and all lights will turn
on for 3 seconds. Then water will be
automatically set to level 2 alkaline
water.
Turn the faucet and open the water
control valve (ON) to start water flow.
6
Cut the acidic water hose within 1m. Failure to do so may lead to the
different ratio of alkaline water and acidic water, and taste of water.
The end of the hose for acidic water output must be lower than the device.
Firmly installed hose goes about 1.5 cm inside the output nest
Check the hose connections for leaks
before using the device.
Open the water tap first to fully drain rust waste before operating the
product since rust waste caught in the water pipe may come out due to the
corporation cock mounted in the water pipe.
Summary of Contents for Hisha
Page 1: ...Hisha USER MANUAL ...
