10
Installation
General model type installation
All hookup part of pipe arrangement has to be covered by teflon tape for avoiding the
leakage and you control the bounding number of tape for keeping the level of a horizontality
and a perpendicularity.
When you decompose and reassemble the product, if you give the over force, it will be
possible to leak after assembling the product because of a pipe arrangement distortion of raw
water, a break out of rubber packing and a breakage.
If you stop down the nut too strong, the water will be possible to leak because the hose in
the hose stop down nut can be torn. Or if you stop down the nut too loose, the water will leak
because the hose is missed from the switch valve.
So you connect the hose safely by giving the proper strength carefully.
If you mix up the raw water inlet with the acidic water outlet, alkali water will not be
produced and be the cause of a failure. So you must not install reversely between the raw
water inlet and the acidic water outlet. If the failure happens because of a reverse installation,
the man who installs the product will have to be charged with the failure.
Nipple with a hole
Switch valve of incoming water
Hose stop down nut
‘O’ Shape Packing
‘O’ Shape Packing
The connecting hose with
product for incoming water
Summary of Contents for Hisha
Page 1: ...Hisha USER MANUAL ...
