14
5
6
Installation
Caution
◼
The water drain hose MUST be less than 600mm long. Shorter is better. A
longer drain hose will cause an increase in back pressure. This will cause the unit
to produce lower concentrations of hydrogen and potentially cause it to fail.
◼
Place the drain hose end for water drain port lower than the machine.
Connect drain tubing to the elbow
connector. Read Caution below.
Plug in the power. You will hear a
start
-
up sound and all lights will
turn on for 3 seconds.
The hydrogen water level is
automatically set to level 2.
Push bar across on the flow
diverter so when tap is turned on
water will flow to the unit. Cold
water only. Turn the ON/OFF
valve ON to start water flow.
Caution
◼
Check the hose connections for leaks before using the device.
◼
Diverter installation on the end of your tap is recommended. Flush machine by
pressing the purified water button. Run for 5
-
10 minutes or until water runs
7
