ENGLISH
1
Hardware Installation
1.
You can connect the receiver to a USB port of a PC.
2.
Install two AAA batteries in the mouse.
3.
Turn on your computer. The mouse can now work.
Warning: (Troubleshooting)
1.
Do not use the wireless optical/laser mouse on a desk which is made
of glass or mirror.
2.
The connection of the wireless device is
factory preset
, so when you
plug the USB receiver into any USB port, the connection between the
micro receiver and the mouse
will be established automatically
.
3.
In case your PC did not install the hardware successfully, remove the
micro receiver from the USB port and go
Human Interface Devices
under
Device Manager
to remove the mouse then plug in the micro
receiver to a USB port again.
4.
If you feel the mouse does not move smooth as usual, it is possible the
batteries have lost their charge so you need to replace them.
Remember to put the batteries in the correct direction.
