KXDMOTO.de
water of go to the doctor when it happens.
7. The rear brake lever is with parking feature as well. Use it when parking.
Battery check (if available)
The battery of this vehicle is maintenance free.
1. Check whether battery joint is tight. If there is some part broken ,please change it.
2. Do not throw off the battery which resulting in environment pollution.
3. Do not charge the battery until it is out of power.
4. When the vehicle placed for extended period of inactivity, check the electric quantity every 3 weeks.
Charge it when below 12V.
5. When charging, using or placing the battery, do not put it upside down.
Tool bag inspection
Check whether tool bag is taken every time before riding.
The tool bag is equipped with some professional tools. You can use time when in need.
Self-protection inspection
Self-protection inspection is the guarantee of pleased driving and life safety. Please wear the protective
clothing correctly to ensure your safety.
Protective clothing consists of these parts below:
! Every check and inspection step above is necessary, there is danger existing when driving. Please
conform the above process before driving, and operate in accordance with the standard strictly when
driving will protect your and life safety. The warning sticker put on the surface of vehicle includes
important safety information. User must comprehend fully and act strictly. It will cause the extreme
injure and even death, if not carefully checking or executing.
Starting
Following the steps below to start the engine:
1. Park the vehicle on the flat ground.
2. Turn on the key switch to "NO" position. Make sure it’s well connected.
3. If the engine doesn’t start, please open the choke valve first. Try again. Close the choke valve, when
the engine steady runs.
3. At the beginning, turn the throttle slowly.
Training
Unprofessional person may not understand the large information of this part. So ”Training "will not
explain in details .
Advice: Learn from local professional institution or the retailer.
KXDMOTO.de
KXDMOTO.de
Operating and driving way in the first or second weeks may affect the vehicle future performance.
Please pay more attention.
During this period, do not turn the throttle into maximum, should alter the speed often.
After training period, maintain the vehicle according to maintenance form strictly. Keep the vehicle in
good condition.
Training is necessary. Improper operation will result in the vehicle, and result in serious injuries and
death.
If the driver is without the safety awareness or driving experiences, please drive it under the supervision
of the adults.
Riding
Before driving, please review the safety driving way and its importance.
1. Pay attention to the brakes working condition always.
2. Driving with only one hand is dangerous and forbidden.
3. Turn the throttle slowly. Never turn it suddenly.
4. Release the throttle and use the brake, to make it slow down.
5. Make sure both the front brake and the rear brake work at the same time when braking. Never force
too hard, that will reduce the working life of the brakes.
6. Do not make dangerous movement while driving to ensure safety.
Parking
1. Turn back the throttle and brake at the same time.
2. Turn the key to "OFF" position when the vehicle stops, then take out the key.
3. Parking function is recommended at this moment to avoid sliding.
Cleaning
After every riding, the driver should clean the vehicle. Then place it on flat ground to clean, and then
check.
1. High pressure air or water will harm the vehicle.
2. Do not splash water on these parts: key switch, cables, and battery.
3. Generally, to wash the vehicle with clean water..
4. Do not turn on the key switch immediately after cleaning.
5. Chain should be daubed with lubricating grease.
Storage
The quality will be influenced if you do not use vehicle for a long time. Before storage, vehicle must be
checked to ensure it is in a good condition.
1. Check the weight of vehicle from the parameter list.
2. Clean up the vehicle, and then wax its surface.
3. Turn off the key switch
4. Clean the chain, and then lubricate it.
5. Lubricate all the cable parts.
6. Place the vehicle well-packed in a cool ventilated place to avoid damp and sun exposure.
Transport
This is a process of transport the well-packed vehicle.
KXDMOTO.de
