background image

set is over. 

 
6.  Display button: If this button is clicked, the number of the program you are 

watching will be displayed. 

 
7.  Video button: Clicking this button continuously, you can change over the mode 

among TV/ Video/ S video/ YPbPr circularly. 

 
8.  Mode button: Clicking this button continuously, you can change over the picture 

mode among the four set modes, i.e. bright, standard, soft and preset. At PC 
mode, this button is used for the right movement of window. 

 
9.  Menu button: Used to enter into and exit from menu. 
 
10. P and Program - buttons: These two buttons are used to increase and 

decrease program number, and they are also used to move cursor up and down 
during menu operation. 

 

11.  and Volume - buttons: These two buttons are used to adjust volume 

and are also used for adjustment in menu. 

 

12. NICAM button: Depend on the model. 

 

13. Still Picture button: Used to still the picture of TV or video program. At PC mode, 

it is used for the left movement of PIP window. 

 

14. Output Mode button: Used to adjust the resolution and refresh rate of output 

picture. (Note: You can click this button continuously to adjust the resolution and 
refresh rate, or you can click the button, use P+ and P- to select item and then 
use VOL+ to realize the function.) 

 

15. TV Wall button: Used for multi-channel preview. 

 

16. Aspect Ratio button: Used to adjust picture aspect ratio, i.e. the changeover 

between 4:3 and 16:9. 

 

17. PIP button: When there is PC signal input, you can click this button to enter into 

PIP function. 

 

18. Factory Default button: You can click this button to resume the factory default 

setting. (Note: Press this button for a long time so as to resume the factory 
default setting.) 

 

19. HD button: Not support in this model. 

 

 

 

3 Product picture and panel description 

 

 

5

Summary of Contents for 1440

















Reviews: