Page 5
Standard 24 volt thermostat with thermostat wire.
Return air duct with a filter grill (minimum 24” x 24”)
Supply duct with “T” connections as necessary for proper air distribution
(dampers are suggested but not required for balancing of system)
Hot air exhaust duct (optional)
4.
5.
6.
7.
The KCA/KCW comes equipped with mounting rails. These rails are made so that the
installer has maximum flexibility is installation methods. Vibration isolation is required but
can be installed on the unit or on the attachment to the building structure. One common
installation method and one that is tried and true is shown in figures 1 and 2.
C.
All mounting hardware and vibration isolator shall be supplied by others. Make sure all
hardware can handle the loads applied. Mounting of unit could be from joists, the
concrete above or any other method provided a mechanical engineer verifies the safety
of the installation method for the individual application and location.
D.
Summary of Contents for CeilingMaster KCA Series
Page 1: ...KCA KCW Operation Manual CEILING MASTER...
Page 2: ......
Page 4: ......
Page 14: ...Revision 071916...
