Phillips Screw Driver
Assembly Tools
3. Attach swivel connector tube to all bases as
shown.
NOTE: Tighten 3/8” lock nuts only until
flush with end of carriage bolts.
Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages before
beginning assembly.
8-32 X 5/8” Flat Head Screw
(Part# TZ314)
(8)
1/4” Flat Washer
(Part# TZ147)
(4)
1/4” Lock Nut
(Part# TZ19)
(4)
3/8” Flat Washer
(Part# TZ189)
(6)
3/8” Lock Washer
(Part# TZ301)
(2)
3/8” Nut
(Part# TZ166)
(2)
3/8” Lock Nut
(Part# TZ197)
(4)
3/8” X 3” Threaded Stud
(Part# JZ166)
(2)
3/8” X 3-1/2” Carriage Bolt
(Part# TZ340)
(4)
27’ Rope
(Part# VZ377)
(4)
NZ328 Rev. 9/18/18
Base
3/8” Lock Nut
Swivel Connector Tube
3/8” Flat Washer
3/8” X 3-1/2” Carriage Bolt
Net Clip (40)
(Part# VZ116)
Net (1)
(Part# 3B4901
)
Snap Link (4)
(Part# VZ82)
Square Nut & Stud (2)
(Part# JZ166)
Net Holder (8)
(Part# VZ431)
Knob (2)
(Part#JZ166)
Swivel Connector Tube (4)
(Part# UZ1296)
7/16” & 9/16”
Wrenches
Rope Cleat (4)
(Part# VZ569)
WARNING
THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE
THREAT OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED
UNDER KWIK GOAL’S LIFETIME GUARANTEE. DO NOT LEAVE THIS EQUIPMENT UNATTENDED
.
TZ339
VZ80
Pulley Assembly (4)
(Part# TZ339 & VZ80)
