NZ295 Rev. 03/25/11
5.
After auger piling is at the correct depth, remove plastic plug from threaded hole in auger piling. Attach
box anchor to the auger piling using hex driver. Torque bolt to 60 in-lbs.
Note: Keep open end of box anchor and cable lanyard toward goal.
6.
When box anchor is secured to auger piling, close lid and back fill around box anchor.
To anchor goal,
make sure cable lanyard X 6-1/4” is out of box anchor as shown. Wrap cable lanyard X 36” around back
rail of goal and secure to cable lanyard X 6-1/4” with padlock.
Auger Piling
Box Anchor
Cable Lanyard X 6-1/4”
3/8” Flat Washer - Steel
3/8” X 1 -1/4” Socket Head
Hex Driver
(NOTE: Opening Toward Back Rail)
Cable Lanyard X 6-1/4”
Assembled Box Anchor
(NOTE: Opening Toward Back Rail)
Box Anchor
Auger Piling
Back Rail
***CAUTION***
All sports equipment must be anchored at all times. Sports equipment not in use must be
disassembled and stored in a safe, secure place. Assembled sports equipment should not be left
unattended. Do not use this equipment during the threat of high winds. Sports equipment should
be checked for safety on a regular basis. Any modifications to this or any Kwik Goal product will
void any and all warranties.
Back Rail
Auger Piling
Box Anchor
Cable Lanyard X 6-1/4”
Padlock
Cable Lanyard X 36”
Cable Lanyard X 36”
Auger Piling
Box Anchor
Back Rail
Padlock
3/8” Flat Washer
Polyurethane
(NOTE: Toward Back Rail)
(NOTE: Toward Back Rail)
