ROTATION LASER R15M ı Instructions of Use
Measuring basics:
The rotation laser combines a laser beam with a motorized mechanism. This makes it
simple to carry out horizontal and vertical levelling work.
The rotation laser may be used in a variety of applications, e.g. on construction sites and
in decoration work.
Measurements may be carried out at radii of up to 15 metres.
Measurements may only be carried out within a temperature range of 0°C to + 40°C.
Measuring length:
Structure
Switch on the rotation laser by pressing the button (c) for around two seconds. The green
level light will light up to indicate that the system is ready for use. Press the button (c)
again to switch off the system.
The rotation laser may be fitted to commercially available construction tripods (not
included).
Application
1) Horizontal rotation
Place the laser on the base plate (h). Switch the laser on as described in “Structure”. You
will see two stationary dots of light at right angles to each other. Adjust the rotation laser
with the help of the levelling screws (f ) so that the bubble in the two top adjusting levels is
located precisely in the centre of the mark on the level’s body. Please note that the levels
respond to the levelling screw movements along the levels’ longitudinal axis. Perfect
measuring results require that the levels be precisely aligned.
Press the rotation button (d) to activate rotation mode. The system will now run at “Fast”
rotation speed. Pressing the rotation button (d) again will switch the rotation speed to
“Medium”. Pressing the rotation button (d) yet again will switch the rotation speed to
“slow”. Pressing the rotation button (d) once more will deactivate the rotation. Now you
will see two stationary dots of light at right angles to each other again.
15,0m
15,0m
9
GB
02_0664-00-GB.indd 9
30.05.13 15:31
