VIA DELLA RESISTENZA 119 – 53035 MONTERIGGIONI – SIENA-ITALIA
ASSISTENZA TECNICA TEL.+39-0577-309144 Fax: +39-0577-309142
e-mail:
T:\003_Apparecchi dal 04-2002\118_Manuali_rev_CE_2007(2010)\209_Manuali 93_42\KLAB_BBR_FRIGOEMOTECA_93_42\man serie KLAB-BBR VERS 1062010_ENG.doc
N.B.: The information and instructions contained in this manual refer to the models currently in production. KW reserves
itself the right to make any modifications deemed necessary for the technical improvement of the products at any time,
communicating said modifications only when reprinting this manual.
.
8/33
2.1.2
Accessories:
kit swivel casters and / or fixed
• grill extra chrome or plastic
• additional grid of stainless steel AISI 304
• additional drawer (perforated) removable stainless steel AISI 304, mounted on sliding rails and tilt (standard on
line Klab BBR, No. 7 for the BBR Klab 700V, No. 14 for BBR Klab 1500V)
• internal dividers (per tray) in plastic
• electronic strip-chart recorder with power 230V/1/50
• closing the control panel, plastic
• electrical outlet internal and external circuit breaker
• double room sensor type NTC
• Single or double room sensor type PT100
Ω
• battery on the controller (standard on line Klab BBR)
• hole inside - outside, with rubber cap
• control of angular velocity of the internal fan
• Provision for connection to a remote unit wardrobe
• Power 115V/1/60 on request
• running without internal electrical contacts
• refrigeration system with two cooling units are completely independent hydraulic circuits in which the electrical
circuit, with alternating operation
• version lined in stainless steel AISI 304 exterior and white
• remote alarm device
2.2 S
ERIES K
-
LAB BBR ADV
Refrige4 ° C.
The Advanguard line ®, has many innovative features and is already projected in the near future, when
consumers and the environment will be regulated by laws and regulations more stringent, and when these
issues will be the maximum sensitivity of users.
This series of refrige4 ° C, brings together many of the goals of research and development that the KW
was placed on the containment of energy consumption:
• an average thickness of 75 mm standard. which in itself reduces power consumption compared to standard
KLAB series, with 60 mm. Insulation
• A cooling unit block, with:
- A capacitor with large surface area and high efficiency on the heat exchange, reducing the differential between
high (HP) and low (LP) pressure, with an increase in COP (Coefficient Of Performance) and lower energy
consumption;
- An evaporator is sized for a small T (for example, between 5 and 10 ° C) and low pressure losses, all in order
to reduce the gap between high (HP) and low (LP) pressure, with increased COP;
- A reduced refrigerant charge, and running fully welded and sealed, in order to lower risk of environmental
impact, in case of leakage.
ADVANGUARD LINE ®, is also a very prestigious series, also to have as standard
- One-piece structure, insulated with polyurethane foam in situ
- Front panel hinged to allow easy access to electrical and refrigerant to the stove
- All internal and external surfaces of sheet stainless steel AISI 304.
- All rounded corners
- Removable magnetic strips for easy cleaning
- Removable racks for tropical plant coolant (up to +43 ° C ambient temperature) all the other features common
to the line KLAB