05
06
How to Change the Cutting
Disc?
1.Please change the cutting disc
when it has been damaged
severely.
2.Push and remove the mount with
the disc.
3.Replace a new cutting disc.
4.Place the disc mount with disc in
place.
How to Clean the Receptacle?
1.Turn it to the back side.
2.Open the receptacle and empty
the paper chips.
How to Use the Alignment
Gauge?
1.Pull down the handle.
2.Rotate the handle lock to secure
the handle.
3.Loosen the two screws on both paper
guides slightly so that that the screws
are still attached to the base.
4.Place the alignment gauge on the
working base and firmly against the
cutter. Make sure the corner
corresponds with the cutter you have
chosen.
5.Push the two paper guides against
the alignment gauge tightly.
6.Tighten the two screws to secure
the paper guides tightly.
7.Release the handle lock.
8.Completion.
