KW Hydraulik SSBZ, Operating Manual, Page: 10 / 36

Stand: 19.03.12 Seite 10
KW Hydraulik GmbH
Tel.: 03675/42198-0
Köppelsdorfer Str. 132 Fax: 03675/42198-11
D-96515 Sonneberg e-mail: info@kw-hydraulik.de
Germany Internet: www.kw-hydraulik.de
SSBZ
SSBZ SSBZ
SSBZ
On principle all tools consist of two groups. One of these groups has to be put on the
piston. The other one has to be put on from above on the guide rail. For further details
please read the paragraphs of the tools.
5.1 bending tool
The bending tool (picture 6) is used to bend contact rails of aluminium and copper up to
120 x 12 mm. The maximum bending-angle is 100º at a bending-radius of 8 mm. You can
also get special tools with a bending-radius of 5 mm, 10 mm and 20 mm.
picture 6: bending-tool
At first make the contact rail machining centre according to capture 4 clear for working. For
bending, operate the SSBZ according to the following points:
You have to remove the plate (picture 7) of the basic-device before installing the
tool you.
die
not
stopping-bolt
punch