EN
Instruction Manual
HydroPneumatic tool for rivet nuts from M3 to M12
with oil pressure adjustment
FASTSETM12
www.kvt-fastening.ch
139
Screwing and unscrewing you see three rings
(
WHITE
,
GREEN
,
RED
).
WARNING!!!
Pressure (force) must always be
regulated as per max. thickness.
Figure 6.2 – C
54
O
IL
(
FORCE
)
PRESSURE ADJUSTMENT
–
SCREW THE INSERT
M3
WHITE
M4
M5
M6
M8
M10
Note: These settings are general guidelines to the operator. Rivet nuts
are not uniform as hardness and therefore some modifications may be
necessary (+ or -).
IMPORTANT
O
IL
(
FORCE
)
PRESSURE ADJUSTMENT
Turning rightward, screwing the force increases.
Turning leftward, decreases.
WARNING
When the pressure (force) adjustment screw is
entirely screwed, unscrewing can be done at a
pressure not less than 6.5 bar (atm).
WHITE
GREEN
RED
GREEN
RED