4
FRONT PANEL
FRONT PANEL
1
POWER SWITCH
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and is receiving power.
The Switcher will remember that last state during a power cycle.
When power is removed and resorted, the last con
fi
guration will be evoked.
2
STATUS DISPLAY
Front panel status display shows current matrix routing con
fi
guration. This same display also shows particular con
fi
guration settings
depending on your current function. In run mode (as shown above), the display shows each Output (destination ) Channel shows which
input (source) is assigned.
3
IR SENSOR
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
4
INPUT STATUS DISPLAY
Input sources 1 to 8 LED illuminates blue to indicate that a video source is present on that input.
5
SOURCE SELECT BUTTONS
Separate inputs 1 thru 8 select buttons are provided each source selection.
6
EDID MODE SELECT BUTTONS
Used to select EDID mode using Input buttons #1 and #2.
7
DESTINATION SELECT BUTTONS
Separate outputs 1 thru 8 select buttons are provided for each destination assignment. Routing can be Source to Destination or one
source to multiple destinations. Example : Press Destination 1,3,5 then press Source 2 will route Input 2 to Output 1,3,5 respectfully.
8
19 INCH EAR MOUNT PAIR
Converts desktop to 19 inch rack mount. Bracket (part # 1 U-440L) INCLUDED.
Image shows rack mount bracket attached.
