KVMSwitchTech KVM-HD88K Instruction Manual Download Page 13

11

REAR PANEL

REAR PANEL

HDMI Connector: 

HDMI Type A SMD 19pin 

Female socket connector.

Note: With the proper adapters, the 
switcher can be used with DVI digital video 
signals HDCP compliant. The DVI support 
Audio input.

AUDIO Connector: 

3.5mm OD phone jack 

female socket connector.

Note: With the proper adapters, the 
switcher can be used with Auxiliary Audio 
signals and the DVI support Audio input.

HDMI Connector: 

HDMI Type A SMD 19pin 

Female socket connector.

Note: With the proper adapters, the 
switcher can be used with DVI digital video 
signals HDCP compliant. The DVI Audio 
supported.

ARC & SPDIF Audio Connector: 

RCA 

Female connector

Ethernet Port: 

Note: With the proper adapters, The Audio 
can be used with HDMI Audio, DVI Audio 
and Auxiliary Audio signals outputs. The 
Auxiliary Audio use digital LPCM-2CH 
output.

5

 

  INPUTS- 1,2,3,4,5,6,7, & 8 HDMI

Connect an HDMI signal source to this Input. This HDMI port supports
HDMI with embedded audio and DVI with AUX audio sources.

If you remove the HDMI screw post, you must use the provided ISO
screws to keep the internal HDMI jack secure. Removing the HDMI 
Screws without installing the ISO screws will void your warranty.

6

 

  INPUTS- 1,2,3,4,5,6,7, & 8 AUDIO (Auxiliary Audio)

Connect a Auxiliary Audio signal link of AUDIO direct Stereo Audio to
this 3.5mm OD Female Jack. This jack supports DVI audio or 
Auxiliary Analog Stereo Audio sources.

AUDIO Connector with Input 1 ~ Input 8 
Audio: The auxiliary audio (Analog Stereo Audio).

 7

   

OUTPUTS- 1,2,3,4,5,6,7 & 8 HDMI

Connect an HDMI signal source to this Output. This HDMI port 
supports HDMI with embedded audio and DVI with AUX audio.

If you remove the HDMI screw post, you must use the provided ISO
screws to keep the internal HDMI jack secure. Removing the HDMI 
Screws without installing the ISO screws will void your warranty.

 8

   

OUTPUTS- 1,2,3,4,5,6,7 & 8 S/PDIF / ARC

Connect a Audio signal output link of the Auxiliary Audio, HDMI digital
audio source or ARC TV return channel audio direct to this RCA jack
audio connector. This port use ARC digital audio(TV return digital 
Audio) and S/PDIF digital audio from HDMI or Auxiliary Audio. Use 
RCA connector with Output 1 ~ Output 8

Audio Output signals :
- ARC Audio (HDTV ARC Turn On)
- S/PDIF (HDMI/DVI Source Audio or Auxiliary Audio LPCM-2CH)

Summary of Contents for KVM-HD88K


























Reviews: