KVM-TEC Ultraline UVX1 Instruction Manual Download Page 4

4    |    kvm-tec

1. INTRODuCTION

Congratulations on the purchase of your new ultralineline uVX1/uVX1-F KVM Extender. 
You have bought a high quality extender. These instructions are part of this product. 
They contain important information regarding safety, use and disposal for every user 
of the ultraline uVX1 and uVX1-F KVM Extender. Please familiarise yourself with the 
information within prior to using your product. use the product only in the manner as 
described and for the areas of application as stated. When passing the product to a third 
party be sure to also supply all instructions and other relevant documentation. Following 
proper use and maintenance, your ultraline uVX1/uVX1-F KVM Extender will bring you 
joy for many years to come.

1.1 INTENDED uSE

This product is intended to be used as a device to increase the distance that a keyboard, 
monitor and mouse can be placed from a computer. This product is intended for professional 
use. The product should not be used in potentially explosive environments.

The product may only be used according to the instructions as described in this manual. All 

use, other than that described in this manual, is seen as unintended use. Modifications in the 

course of technological progress are reserved. In these user instructions the Ultraline  

UVX1/UVX1-F KVM Extender is referred to as ‘product’ or ‘extender‘. The UVX1/PC is referred to 
as the ‘local unit’ - CPU and the UVX1/Monitor is referred to as the ‘remote unit‘ - CON.

WARNING 
The device may not be opened by an authorized technician. 
Danger of electric shock!

Summary of Contents for Ultraline UVX1






































Reviews: