16 | kvm-tec
kvm-tec | 17
Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
2. EXTENDER INSTALLATION
2. EXTENDER INSTALLATION
kvm-tec | 16
2. EXTENDER INSTALLATION
2.1 UNPACKING AND CHECKING THE CONTENT
Before using the product for the first time it should be checked for damage. In case of damage
due to transport inform the carrier immediately. Before delivery the product is checked for its
function and its operating safety.
Make sure that the packaging contains the following content:
4K/5K:
1x ScalableLine /local Extender CPU
1x ScalableLine /remote Extender CON
2 x 12 VDC 2 A power supply
1 x DP - DP cable 1.8 m/5,9ft
1x USB A-B cable 1.8m/5,9ft
2 x SFP+ Multimode Modul up to 500m/1640ft
8 x mounting feets
Full HD:
1 x MAXflex /local Extender CPU
1 x ScalableLine /remote Extender CON
2 x 12 VDC 2 A power supply
1 x DVI-DVI cable 1.8m / 5.9ft
1 x USB A-B cable 1.8m / 5.9ft
2 x SFP+ Multimode Modul up to 500m/1640ft
8 x mounting feets
The monitor or television in use has only one HDMI input, no DP.
With HDMI it is important to know that we need HDMI 2.0 for UHD @ 60Hz.
2.2 INSTALLING THE EXTENDER
WARNING!
Read and understand all safety information before installing the product.
The units can be set up to access point to point or over a Switching System with a host
computer.
In the case of the latter, an additional 10 G Network Switch and a Windows PC or tablet with the
Switching Manager must be installed with a Network Switch, each user can gain quick access to
any of the required computers.