KVM-TEC Masterline MVX2, User Manual, Page: 2 / 40

2 | kvm-tec kvm-tec | 3
table of contents table of contents
1. Introduction 6
1.1 Intended Use 6
1.2 safety Instructions 7
1.3 Technical Specifications 9
1.4 Product elements 10
1.5 Meaning of leD indicators 12
2. Installation of the extender 13
2.1 Unpacking and checking the contents 13
2.2 Mounting options 14
2.2.1 Mounting pads and rubber feet 14
2.2.2 Mounting kits (optional) 14
2.3 Installing the extender 15
2.4 startup 20
2.5 Replacing the sfP module 20
2.6 Removing a catx cable 21
2.7 Removing a fiber cable 21
3. Extender menu/settings 23
3.1 Using the on screen menu 22
3.2 status menu 23
3.3 Determine the current firmware version 24
3.4 Performing a firmware update 25
3.4.1 Update via a bitmap image 26
3.4.2 Update with USB stick 27
3.4.3 Performing autoupdate 30
3.4.4 Performing network update 31
3.5 Unlock an upgrade 32
3.6 How to enable or disable the USB Memory upgrade 33
3.7 Defining what DDC information is used by the PC 34
3.8 Changing the network settings 34
3.9 Changing the extender settings 35
3.9.1 Optimizing VGA preferences 37
3.9.2 How to enable or disable the USB Compatibility Mode 38
3.9.3 Set the audio volume 39
3.9.4 set the baud rate for the RS232 (serial) connection 40
3.9.5 Show the last received image 41
3.9.6 Turn on or off monitor synchronization 42
3.9.7 Lock the main menu 43
3.9.8 Use power saving mode 44
3.9.9 Select your type of keyboard 45
3.9.10 Change the keyboard fallback mode 46
3.9.11 Change keyboard shortcuts 47
3.10 Switch between different computers 48