manualshive.com logo in svg

KVM-TEC MASTERflex KT-6012, Manual, Page: 39 / 88

Share
Download
KVM-TEC MASTERflex KT-6012 Manual Download Page 39

kvm-tec    |    39

Misprints, errors and technical changes reserved

Misprints, errors and technical changes reserved

3. EXTENDER  SETTINGS

3.2 FIRMWARE VERSION DISPLAY

Make sure that the main menu is open. Under „A“ - About the currently installed firmware 
version of the remote (CON) and local (CPU) extender is displayed (e.g. ‚4267‘).

3.3 FEATURES MENU

Press the F key to enter the Features menu.

Features Menu

 

P 

Point to Point Mode  

Enabled/Disabled

 

 

   

(Point to Point excludes itself with Matrix mode)

 

M 

Matrix Switching Mode 

Disabled/Enabled

 

D 

Freeze last Image   

(Disabled)Disabled/Enabled

 

E 

USB Emulation Mode  

(Disabled ) Disabled/Enabled

 

S 

USB Save Feature  

(mass storage usable) Disabled/Enabled

 

C 

Diagnosis 

Diagnostic menu

 

U 

Unlock Features 

Activate features

 

I 

IP Management 

IP Management 

 

L 

Link redundancy 

for single units 

  

Summary of Contents for MASTERflex KT-6012

























































































Reviews:

No comments