TracVision TV1 User’s Guide
31
Antenna Settings
To configure the system to use data from a connected NMEA device,
follow these steps:
1.
To use a
NMEA 0183
device, configure it to transmit one or
more of the following messages at 4800 baud:
To use a
NMEA 2000
device, configure it to transmit one or more
of the following messages via the CAN network:
2.
Select the NMEA source at the TracVision Setup Wizard. You
can launch the Setup Wizard from the web interface (go to
Settings > General Settings).
$--xxx Message
Description
HDG
Heading, Deviation and Variation
HDM
Heading, Magnetic
HDT
Heading, True
OSD
Own Ship Data
THS
True Heading and Status
VHW
Water Speed and Heading
RMC
GNSS Position Data
PGN
Description
127250
Vessel Heading
129029
GNSS Position Data
