TracVision M3/M2
1
Addendum
PLEASE READ!
Important Addendum to Your Product Manual
This addendum applies to the TracVision
®
M3 and M2.
Rubber Sealing Boot to Protect the Antenna’s Cable Connection
A rubber boot is provided with the antenna cable to help protect the
cable connection from the elements. An extension is supplied in the
kitpack in case you need to use a right-angle connector. Follow the
guidelines below to use these sealing components.
• When routing the cable belowdecks, be sure to keep the end with
the rubber boot at the antenna site so that you can install the boot
at the antenna’s cable connection.
• If you are using a right-angle connector, place the right-angle
rubber boot extension onto the end of the cable before you connect
it. Then, after you connect the cable, slide the extension up the
cable until it covers the right-angle connector.
• Once you have connected the cable to the antenna, slide the rubber
boot up the cable until it covers the connector. If you are using a
right-angle connector, be sure the boot mates with the extension, as
shown below.
Right-Angle
Connector
Extension
Rubber Boot
Connector
Cover
Rubber Boot
Right-Angle
Boot Extension
ECO #8305
