Now that you have installed the TracVision
system, you need to turn the system ON and
verify that the antenna works properly.
1. Ensure the antenna has a clear view of the
southern sky.
2. Apply power to both the TV and the
TracVision system.
3. Turn on the power switch on the front of the
receiver.
4. Wait while the antenna searches the sky for
the DIRECTV satellite. Once the antenna
finds the satellite, the receiver downloads
the program guide. A progress bar should
display on your TV.
It could take 60 seconds to
load the guide.
5. Once a DIRECTV picture appears on the TV,
verify that the 3 status lights on the front of
the receiver are lit green.
A - VOLTAGE Light
B - RECEIVER Light
C - ANTENNA Light
Refer to the Quick Start Guide and Receiver
User’s Guide for complete operation
instructions and troubleshooting information.
54-0274-01 Rev. C
11
© 2006 KVH Industries, Inc., All rights reserved.
Test the System
11
Installation
If your satellite dish is ready for DIRECTV
®
service, please wait until your
Advanced Program Guide
™
is prepared.
Acquiring guide data...
Status Lights
Power Switch
