4-3
Testing the System
Now all you need to do is turn the system on and
ensure everything works properly. Follow the steps
below to turn on the TracVision A5 system and verify
proper operation.
1.
Ensure that the antenna has a clear view of the
satellite. The antenna requires an unobstructed
view of the southern sky to receive satellite TV
signals. T
rees, buildings, highway overpasses,
etc., can block satellite signals. Heavy rain or
snow may also interrupt satellite signals. For
complete details about satellite reception
requirements, refer to
Section 1.3, “Receiving
Satellite TV Signals,”
in the
TracVision A5 User’s
Guide
.
2.
Apply vehicle power and turn on the vehicle’s
entertainment system.
3.
Turn on the TracVision A5 receiver’s front panel
power switch. The switch’s light illuminates and
the receiver beeps twice.
4.
Wait 30 seconds. The antenna should then power
off and the receiver should beep once.
5.
Press the remote control’s
SAT button. The button
should blink red. If it
doesn’t, check the remote
control’s batteries.
6.
Now press the POWER
button. The receiver
beeps twice to indicate
that power is again
applied to the antenna.
54-0208-01
4.6
TracVision A5 Installation Guide
P
A
G
E
CH
VOL
PWR
DVD
VCR
AUX
TV
SAT
GUIDE
MENU
INFO
CLEAR
TURBO
FAV
SELECT
MUTE
CH
PREV
P
A
G
E
O
N
EL
INE GU
ID
E
Since the TracVision antenna requires an
unobstructed view of the southern sky to
receive satellite signals, the system will not
work when the vehicle is in a garage.
Receiver Front Panel Power Switch
Power Switch
Summary of Contents for TracVision A5
Page 1: ......
