Terminating the Antenna Cable
30
TracPhone V30 Installation Guide
5.
Insert the end of the cable into the #2 end of the
CST-240 stripping tool. Then rotate the tool clockwise
around the cable until the tool turns easily. This
removes the cable jacket from the end of the cable,
exposing the braid and dielectric.
Figure 50: Stripping the Cable Jacket
Figure 51: Cable Stripped, Exposing Dielectric
6.
Using the DBT-U deburr tool, deburr and chamfer the
center conductor. Avoid nicking the aluminum tape
covering the dielectric.
Figure 52: Deburring the Center Conductor
7.
Gently flare the braid with your fingers.
Figure 53: Flaring the Braid
