8
Follow the instructions below to install the new
lower feed.
a.
Using a #2 Phillips screwdriver, remove the
#6-32 screw securing the lower feed cover
(see
NOTE:
Leave the other cover screw installed for now.
To avoid damage, handle the new lower
feed/cover extremely carefully once you
remove the screw. If you exert pressure on
the cover, the cover might pivot and break the
phase cards on the lower feed.
IMPORTANT!
Install the New Lower Feed/LNB
Figure 11 Lower Feed Cover Screw
Cover
Remove this
#6-32 Screw
5
