Crate packaging
27
Fitting the lift arms
Fit the lift arms in a position whereby the bearing shafts for fitting the
rotors point to the rear.
See the overview on page 27.
When fitting them, secure the lift arms with suitable lifting
accessories and stands.
Use a brush to grease the flange pieces and lift arm supports.
Place the flange pieces on the lift arm support.
Use shim discs to evenly adjust the seat of the lift arm.
Insert the bolts.
Fit the dowel pins.
Screw the flange pieces tight (torsion-free).
Shim disc
Flange piece
Lift arm
Lift arm support
Shim disc
Flange piece
No.
Quantity
Part
1
2
Lift arms
2
4
Flange piece
3
4
50 x 62 x 1 shim discs
5
4
50 x 62 x 3 shim discs
6
16
M 12 x 50 bolts
7
16
13 x 30 x 4 washers
8
16
M 12 self-locking nuts
9
8
8 x 36 dowel pins
10
8
13 x 36 dowel pins
Drive in the dowel pins at 90°
to each other.
Dowel pins
Washers
Bolts
