Preparations on the field
58
On both rotors, remove all the tine supports (1) + (2) from the
transport holder and fit them in place (see adjacent illustration).
→
See »Fitting the tine supports«, page 59.
Secure the tine supports with lynch pins.
Move the deflector bar to the work position until the latch engages.
→
See »Folding down the deflector bar«, page 59.
Release the rotor securing device.
→
See »Releasing the rotor securing device«, page 59.
Switch on the tractor.
Observe the instructions in chapter »Preparing for use«, section
»Working depth« on page 47.
Outer tine supports
Inner tine supports
