Preparations on the field
59
Basic settings
Releasing the rotor
securing device
Lower the machine to the work position.
Release the rotor securing device.
If the rotor securing device is not released, the rotor arms could be da-
maged when the implement is put into operation.
Fitting the
tine supports
Remove the tine supports from the transport holder.
Attach the tine supports to the tine arm and secure with lynch pins.
Folding down the deflector
bar
After the tines have been attached, all guard devices must be mo-
ved from the transport to the work position.
Fold out the deflector bar as follows:
Release the deflector bar by pulling it out of the lock for the
transport position.
Fold the deflector bar through 180° and engage it in the lock for the
work position.
Tine support
Tine arm
Rotor securing
device
Tine support
Tine arm
Lynch pin
Tines
Deflector bar
Lock for transport position
Lock for work
position
