Adjustments
41
Stability of the unit
To acquire better stability, the rows of discs at the front and rear should
operate at the same depth.
To this end, make sure that the chassis is horizontal, adjusting the
length of the third point.
Adjustment of
accessories
Lateral deflectors
Horizontal adjustment
of the deflector
Remove the pin locking the spindle
A
.
Remove the spindle
A
.
Slide the deflector assembly on the tube to adjust the distance
between the outer disc and the metal panel according to the path
of the flow of soil.
Put back the spindle
A
.
Lock the spindle with the pin.
If the front discs are working at a greater depth
than the rear discs,
the machine will move to the right
when working.
If the front and rear discs
are working at the same depth
the machine will be stable when working.
If the rear discs are working at a greater d
than the front discs,
the machine will move to the
left when working.
A
Summary of Contents for Qualidisc Farmer
