8/02
33
15.0 Headland driving
1. The front of the plough is lifted by means of the link arms on the tractor, fig. 40.
2. The middle and rear section is lifted by means of the wheel cylinders. When the plough is
fully raised, the joystick/foot pedal is activated to raise the rear section of the plough.
3.
NB!
When the plough has left the furrow, be sure the rear plough section is raised to its
uppermost position before reversing commences.
4. Rotate the plough half way (fig. 41) and drive the tractor as shown in fig. 44. When the tractor
is pointing in the direction for driving into the furrow, the plough is rotated to its ploughing
position.
5. Lower the first part of the plough by lowering the tractor's link arms. Then lower the middle
section by means of the wheel cylinders on the wheel carriage (fig. 43). Activating the
joystick/foot pedal will then lower the rear plough section. For a smooth entry with the
second part, the wheel cylinders must not be lowered too quickly.
6. When using a mechanical spring-loaded rear section, it is an advantage not to lift the link
arms on the tractor to maximum height. This will prevent the rear part of the plough from
hitting the ground when reversing the plough on the headland.
Fig. 43
Summary of Contents for PL-100
