Kverneland Miniair Nova Operating Manual Download

Page: 97 / 135

Parking and storage

Parking and secu-

ring the machine

Increased risk of injury
There is an increased risk of injury when uncoupling the machine from
the tractor. Therefore:

•

Secure the tractor in such a way that it cannot roll forwards or back-
wards

•

Never stand between the tractor and the machine during uncou-
pling

•

Actuate the three-point power lift system slowly and carefully

•

Make sure the machine is standing on a secure and level surface

•

Only disconnect the hydraulic hoses if there is no pressure in the
tractor and machine hydraulic system

Nonobservance can lead to serious or fatal injury.

Uncoupling the ma-

chinery

> Uncouple the hydraulic and electrical connections

> Machine has to be uncoupled in the reverse order, as they have

been coupled. In particular, follow the safety instructions.

→

Chapter »Coupling the machinery«, page 29.

> Pull out the control system plug and remove it from the tractor

mount

> Store the electronic control system in a dry place

Emptying the seed

hopper

Empty the seed hopper

→

Chapter »Preparing for operation«, section »Emptying the seed

hopper«, page 58.

Emptying the granule

distributor [+]

Empty the bin of the granule distributor

→

Chapter »Preparing for operation«, section »Emptying the tank«,

page 71.

Summary of Contents for Miniair Nova








































































































































Search results

Summary of Contents for Miniair Nova

Reviews:

Related manuals for Miniair Nova

Brands by name

Popular brands

Kverneland Miniair Nova, Operating Manual

Search results

Summary of Contents for Miniair Nova

Reviews:

Related manuals for Miniair Nova

Brands by name

Popular brands