Making adjustments to the machine
15
Making adjustments to the machine
This chapter explains how to adjust the machine.
Tightening torque bolted clamps
It is very important to tighten the bolted clamps with 589 - 638 Nm (60
- 65 kpm) torque. Loosening of the bolts may otherwise lead to ex-
treme tension and breakage of the frame.
Tine distance
You can adjust the tine distance as desired. Refer to the CLG-II as-
sembly manual for instructions.
Wheel position
When the machine sinks at the rear during cultivating, position the
wheels backward.
To adjust
> Loosen the nut
> Adjust the position
> Retighten the nut with 589 - 638 Nm (60 - 65 kpm) torque
Auto-reset spring
configuration
•
The Auto-Reset springs are well configured when the tines do not
release during cultivating, unless an object is hit.
•
When soil type or conditions change, you may find the Auto-reset
spring configuration incorrect. You can change the configuration
accordingly.
To change the spring configuration
> Screw out the screw until the spring tension is fully released
> Change the Auto-reset spring configuration
> Add some grease to the screw for smooth screwing
> Screw in the screw until the spring length from pin to pin is 69 cm.
screw
screw
