Kvaser PCI104 User's Guide
7(17)
Kvaser AB, Mölndal, Sweden — www.kvaser.com
3.2 Technical Specification
The technical specification for the product version of the Kvaser PCI104 board presented in
Table 1.
Table 1. Kvaser PCI104 with IDC Headers CAN connectors.
PC interface
PCI104
Stack-through connector
Yes
Voltage Signaling
Supports 5 V and 3.3 V
Required Supply Voltages
5 V and 3.3 V
PCI bus rate
32 bit, 33 MHz
Galvanic Isolation
Yes
Number of CAN channels
2
CAN 2.0A and 2.0B active
Yes
CAN connectors
2 x 10 pin IDC Male Headers.
CAN Transceivers
High Speed CAN, ISO 11898-2 compliant.
CAN Controller
Built into the M16C, ISO 11898-1 compliant.
Microcontroller
Renesas M16C/6N, 256 kB Flash and 10 kB RAM.
Bit rate, CAN bus
20 kbit/s to 1 Mbit/s
Timestamp resolution
1
μs
Error Frame Detection
Yes
Error Frame Generation
Yes
Error Counters Reading
Yes
Silent Mode
Yes
Hardware requirements
Industrial computer with a free PCI104 slot.
Power consumption
Approximately 1 W @ 200 mA
Software requirements
2
Windows XP or later. (For other operating systems, see
Kvaser web or contact Kvaser support.)
Configuration
Done by software via Plug & Play
Dimensions (W*L)
91 x 96 mm (approx. 3.6 x 3.8 in.)
Operating temperature
-40 ºC ... +85 ºC
Storage temperature
-40 ºC ... +85 ºC
Relative Humidity
0% ... 85% (non condensing.)
2
Contact us for other operating systems.
