Kvaser Ethercan HS User’s Guide
17 (23)
5
Appendices
In this section you will find technical information about Kvaser Ethercan HS and the
device’s connectors.
5.1
Technical data
In Table 7 below you will find the Kvaser Ethercan HS technical specifications.
CAN Channels
1
CAN Transceiver
TJA1051T (Compliant with ISO 11898-2)
CAN Bit Rate
40 kbit/s up to 1 Mbit/s
Time stamp resolution
25 µs
Error Frame Detection
Yes
Error Frame Generation
No
Silent mode
No
PC interface
Ethernet
Ethernet interface
Ethernet IEEE 802.3u 100BASE-TX
Ethernet connector
Shielded RJ45 socket STP
Galvanic isolation
Yes
Power Supply
PoE (Power over Ethernet) IEEE 802.3af or
CAN +9 V to +35 V DC
Power consumption
Typical 1.2 W
Software requirements
Windows (Vista or later)
1
.
Hardware configuration
Done by software.
Dimensions
35 x 165 x 17 mm for body incl. strain relief
Weight
120 g including cables and connectors.
Operating temperature
−20
◦
C to +70
◦
C
Storage temperature
−40
◦
C to +85
◦
C
Relative Humidity
0 % to 85 % (non-condensing.)
Table 7: Technical specifications.
5.2
CAN connector
Kvaser Ethercan HS devices that use the 9-pin D-SUB connector (see Figure 11
on Page 18) have the pinning described in Table 8 on Page 18.
1
For other operating systems, contact Kvaser support.
Kvaser AB, Mölndal, Sweden — www.kvaser.com
