Kvaser Hybrid CAN/LIN User’s Guide
13 (21)
CAN/LIN Channels
1 (Configurable as CAN or LIN)
CAN Transceivers
TJA1051T/E (Compliant with ISO 11898-2)
CAN Bit Rate
50 kbit/s to 1 Mbit/s
CAN FD Bit Rate
Up to 5 Mbit/s (with correct physical layer implementation)
CAN/LIN Controller
Kvaser CAN/LIN IP in FPGA
LIN Transceivers
TJA1021T/20
LIN Bit Rate
1 - 20 kbit/s
Time stamp resolution
50 µs
CAN Max message rate
20000 msg/s
Error Frame Detection
Yes
Error Frame Generation
No
Silent mode
No
Kvaser MagiSync
No
Kvaser CANtegrity
No
PC interface
USB 2.0
Power consumption
max 195 mA
Hardware configuration
Done by software (Plug & Play).
Software requirements
Windows (7 or later), Linux.
Dimensions
35 x 165 x 17 mm for body incl. strain relief
Weight
120 g
Operating temperature
−40
◦
C to +85
◦
C
Storage temperature
−40
◦
C to +85
◦
C
Relative humidity
0 % to 85 % (non-condensing.)
Table 7: Technical Specifications.
4.3
CAN/LIN connector
Kvaser Hybrid CAN/LIN devices that use the 9-pin D-SUB connector (see Figure 5)
have the pinning described in Table 8 on Page 14.
Figure 5: The D-SUB 9 connector pin numbers
Kvaser AB, Mölndal, Sweden — www.kvaser.com
